*New Arrivals*

Daffodil #1 Petals and Throat Veiner Set by Simply Nature Botanically Correct Products®, was created by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic daffodil petals and throat interpretations possible. The Daffodil Petal s and Throat Veiner Set creates 2 different sized petals, which each measure 1 5/8" x 1 ½" and 1 ½" x 1 ¼". The Daffodil center/throat measures 1 5/8" tall x 2" wide. Simply Nature brand veiners capture each ruffle, pillow & vein because they were created from the actual top and the actual bottom of each leaf or petal, thus creating the most realistic replica of nature. Botanically correct veiners leave room for your wire and will not cut your paste and since the veiners were created by nature, they also shape and form your medium as well. Each Simply Nature Brand veiner is made in the USA and is poured using the highest quality platinum based, food approved silicone. The matching cutter(s) for this set are not available yet, but when they are, the item number will be CUT733.

Sunflower Leaf Cutter Large by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic sunflower leaf interpretation possible. The large sunflower leaf cutter measures 4 3/8" x 2 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Sunflower Leaf Veiner Large (VEI110). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Cherry Leaf Cutter Large by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic cherry leaf interpretation possible. The large cherry leaf cutter measures 3" x 1 5/8". This cutter is designed to be paired with the Simply Nature Botanically Correct Cherry Leaf Veiner Large (VEI196). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Cherry Leaf Cutter Medium by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic cherry leaf interpretation possible. The medium cherry leaf cutter measures 2 1/2" x 1 1/8". This cutter is designed to be paired with the Simply Nature Botanically Correct Cherry Leaf Veiner Medium (VEI197). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Hazel Leaf Cutter Medium by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic hazel leaf interpretation possible. The medium hazel leaf cutter measures 2 5/8" x 1 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Hazel Leaf Veiner Medium (VEI105). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Hazel Leaf Cutter Small by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic hazel leaf interpretation possible. The small hazel leaf cutter measures 2" x 1 1/8". This cutter is designed to be paired with the Simply Nature Botanically Correct Hazel Leaf Veiner Small (VEI104). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Southern Magnolia Leaf Cutter Medium by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic southern magnolia leaf interpretation possible. The medium southern magnolia leaf cutter measures 4 1/8" x 1 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Southern Magnolia Leaf Veiner Medium (VEI210). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Primrose Leaf Cutter XL by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic primrose leaf interpretation possible. The XL primrose leaf cutter measures 4 5/8" x 2 1/4". This cutter is designed to be paired with the Simply Nature Botanically Correct Primrose Leaf Veiner XL (VEI204). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Primrose Leaf Cutter Small by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic primrose leaf interpretation possible. The small primrose leaf cutter measures 2" x 3/4". This cutter is designed to be paired with the Simply Nature Botanically Correct Primrose Leaf Veiner small (VEI205). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Northern Magnolia Leaf Cutter Small by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic northern magnolia leaf interpretation possible. The small northern magnolia leaf cutter measures 1 5/8" x 1". This cutter is designed to be paired with the Simply Nature Botanically Correct Northern Magnolia Leaf Veiner Small (VEI213). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Northern Magnolia Leaf Cutter Medium by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic northern magnolia leaf interpretation possible. The medium northern magnolia leaf cutter measures 2 5/8" x 1 1/4". This cutter is designed to be paired with the Simply Nature Botanically Correct Northern Magnolia Leaf Veiner Medium (VEI212). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Lily of the Valley Leaf Cutter Large by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic lily of the valley leaf interpretation possible. The large lily of the valley leaf cutter measures 5 5/8" x 2". This cutter is designed to be paired with the Simply Nature Botanically Correct Lily of the Valley Leaf Veiner Large (VEI202). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Lily of the Valley Leaf Cutter Medium by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic lily of the valley leaf interpretation possible. The medium lily of the valley leaf cutter measures 4 1/2" x 1 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Lily of the Valley Leaf Veiner Medium (VEI203). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Asiatic Lily Leaf Cutter by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic asiatic lily leaf interpretation possible. The asiatic lily leaf cutter measures 3 7/8" x 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Asiatic Lily Leaf Veiner (VEI208). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Clematis Petal Cutter by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic clematis petal interpretation possible. The clematis petal cutter measures 2 3/8" x 1 1/2". This cutter is designed to be paired with the Simply Nature Botanically Correct Clematis Petal Veiner (VEI194). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Southern Magnolia Petal Cutter Set by Simply Nature Botanically Correct Products®, was designed by Jason Dontz and Jennifer Dontz of Sugar Delites, and creates the most realistic southern magnolia petal interpretations possible. The southern magnolia petal cutter set includes 3 petals to compose a complete southern magnolia flower. The cutters measure 3 5/8" x 3", 3 7/8" x 2 ¼", and 3" x 1 1/8". This cutter set is designed to be paired with the Simply Nature Botanically Correct Southern Magnolia Petal Veiner Set (VEI190). When paired together, Simply Nature brand cutters and veiners will create a detailed botanically correct replication of nature.

Super Gold Metallic Dust by Rolkem 100g. This metallic highlighter dust is food approved in Europe, Canada, and Australia, otherwise it is considered non-toxic and for decorative use only. Rolkem super dust colors provide a glossy finish and will give your finished piece a beautiful metallic look. You can paint, mix, or dry brush this dust on fondant, gumpaste, icing, etc. and it leaves a brilliant shine. Color can slightly vary from batch to batch. This 100g container is the equivalent to 30 of the small 10 ML containers of dust.

Scabious XL Leaf stainless-steel cutter measurements – XL leaf length 13.5 cm x width 4 cm. (XL leaf length 5 1/2" x width 1 3/4"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Scabious Medium Leaf stainless-steel cutter measurements – medium leaf length 8.7 cm x width 1.6 cm. (Medium Leaf Length 3 7/16" x Width 5/8"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Scabious Small Leaf stainless-steel cutter measurements – small leaf length 6.8 cm x width 1.3 cm. (small leaf length 2 11/16" x width 1/2"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Scabious Small Calyx stainless-steel cutter measurements – length 3.3 cm x width 3.3 cm. (small leaf length 1 5/16" x width 1 5/16"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Scabious Large Calyx stainless-steel cutter measurements – Length 4.6 cm x width 4.6 cm. (small leaf length 1 13/16" x width 1 13/16"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Hydrangea Petal rolled edge metal cutter set of 4 measurements - small petal length 1.4 cm x width 1.7 cm, medium petal length 1.7 cm x width 1.8 cm, large petal length 2.4 cm x width 2.6 cm, X- Large petal length 2.4 cm x width 3.2cm. (small petal length 9/16" x width 11/16", medium petal length 11/16" x width 11/16", large petal length 15/16" x width 1", XL petal length 15/16" x width 1 1/4"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The Rolled edge cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.

Buttercup Leaves set of 3 stainless-steel cutter measurements – small leaf length 4.6 cm x width 3.1 cm, medium leaf length 4.1 cm x width 3.1 cm, large leaf length 4.5 cm x width 2.6 cm. (small leaf length 1 13/16" x width 1 1/4", medium leaf length 1 5/8" x width 1 1/4", large leaf length 1 3/4" x width 1"). This distinctive range of Botanically Correct Products By Sugar Flower Studio are designed by master sugar artist Robert Haynes. These quality products can be used to replicate time and again, stunning life like flora in any edible or non-edible medium of your choice. The stainless-steel cutters in the Sugar Flower Studio range are perfectly matched to fit within the perimeters of each corresponding silicone veiner, giving you a time efficient and botanically correct result each time. These cutters can be used with edible mediums including sugar flower paste (SFP) gum paste, fondant, modelling chocolate and marzipan. They can also be used with non-edible modelling mediums: cold porcelain (Modena), Hearty - Artista soft, polymer clay and modelling clay. Instructions for use of products: Using the Sugar Flower Studio Hand saver, place on top of each cutter, cut out petals or leaves. Place thinned out petal or leaf shape into lightly corn-floured Sugar Flower Studio veiner. Press firmly to give a natural vein. Remove petal or leaf and allow medium to go leathery before colouring. To clean cutters, wipe with an alcohol dampened soft cloth after each use. Copyright © 2016 Sugar Flower Studio.